Glue, finishes and shop supplies
Estimate application quantities and split product batches.
No calculators match these filters. Choose All tasks or All contexts to broaden the list.
Choose a calculator
-
Edge banding roll requirement
Sum selected edge lengths, allow trim per segment and round the purchase to whole rolls.
Inputs: Selected edge lengths (in), Total trim per edge segment (in), Length in one purchasable roll (ft).
Results: Banding length including trim (ft), Whole rolls to buy (rolls).
-
Wood finish coverage requirement
Calculate gallons of stain or finish from coated area, coats and the stated product coverage.
Inputs: Actual coated area (ft²), Number of coats at this coverage (coats), Coverage per gallon for one coat (ft²/gal).
Results: Calculated finish volume (US gal).
-
Wood glue quantity estimate
Estimate glue volume from bonded area and a product-specific coverage value entered from its label or technical sheet.
Inputs: Length of each glue line (in), Bonded width (in), Number of faces/coats with this coverage (faces), Product coverage per U.S. gallon (sq ft/gal).
Results: Total coated area (sq ft), Estimated glue volume (US gal), Estimated glue volume (US fl oz).
-
Epoxy mix ratio calculator
Split a target batch quantity according to the exact resin/hardener ratio and mass-or-volume basis specified by its manufacturer.
Inputs: Total mixed batch amount (selected unit), Resin ratio parts (parts), Hardener ratio parts (parts).
Results: Resin amount (selected unit), Hardener amount (selected unit).
-
Lid hinge moment estimate
Estimate static hinge-line moment for a uniform rectangular lid from its weight and full depth.
Inputs: Lid weight (lb), Hinge line to far edge depth (in).
Results: Static moment at hinge line (in-lb).